Search
 
 

Display results as :
 


Rechercher Advanced Search

Subscribe to our Feed
addtomyyahoo4 Subscribe with BloglinesAdd to netvibes
Add to Google

Question for connection

Go down

Question for connection Empty Question for connection

Post by scorpio75m on Sat Sep 05, 2015 11:39 pm

Hi all... Need help on this.
Is it possible to use different speaker set than the one provided in the home cinema Sony bdv-2100? I have Jamo small size bookshelf speaker which have 6 Ohm impedance & Atlantic active sub. Can I connect those ones to the Sony bdv-e2100 instead of the original ones? If yes which is better? 
1- Main out L/R go to my sub then out to L/R speaker?
or
2- Sub out to my sub & Main out L/R go to my main L/R speaker?

I only need 2.1 system without centre speaker & rear speaker. Thank you

scorpio75m
New Member
New Member

Number of posts : 4
Age : 43
Location : JB Johor
Registration date : 2015-08-23

Back to top Go down

Question for connection Empty Re: Question for connection

Post by STC on Sun Sep 06, 2015 10:47 am

Hi Scorpio75m,

IMHO, I would stay with the original speakers as they were designed to meet the power output of the Sony Amp. However, you can try with connection (2) if you want to experiment with the JAMO speakers.

Please follow the manual on playing multichannel in 2.1 setup. You can have a better results by adding a simple stereo amplifier for the JAMO speaker for improvement.

Good luck! Smile
STC
STC
Frequent Contributor
Frequent Contributor

Number of posts : 412
Age : 54
Location : Klang Valley
Registration date : 2010-08-15

Character sheet
Source(s): Ambiophonics setup.
Amplification:
Speakers: Electrostatics

http://goo.gl/CF1C6B

Back to top Go down

Question for connection Empty Re: Question for connection

Post by scorpio75m on Sun Sep 06, 2015 11:39 am

Noted. Thank you STC

scorpio75m
New Member
New Member

Number of posts : 4
Age : 43
Location : JB Johor
Registration date : 2015-08-23

Back to top Go down

Question for connection Empty Re: Question for connection

Post by scorpio75m on Fri Oct 02, 2015 2:02 pm

Tested using my jamo bookshelf speaker from bluray amp but the sound very kosong. 
Tested wiring from speaker main out to my powered subwoofer also same. Found specs output from the main L/R is 180hz-20khz. Now planing to get speaker line out converter to line in for main L/R and subwoofer output. Anyone using this? How the sound?

scorpio75m
New Member
New Member

Number of posts : 4
Age : 43
Location : JB Johor
Registration date : 2015-08-23

Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum