TEAC UD-505 USB DAC & Headphone Amplifier

by **stylelaser.com.my** Fri Jan 11, 2019 12:13 pm

TEAC UD-505 USB DAC & Headphone Amplifier Brand New. Now Selling At RM6,299. Free Shipping Within West Malaysia.

Please visit [You must be registered and logged in to see this link.] find out more products for sale at very special price...

USB DAC/Headphone Amplifier

USB DAC/耳机放大器

UD-505

Dual monaural USB DAC/headphone amplifier supporting DSD512 and PCM32/768
The UD-505 is a flagship dual monaural USB DAC with an integrated fully-balanced headphone amplifier, that fuses high-end audio design concepts and TEAC’s decades of audio design experience, in an A4-sized footprint.
双单声道USB DAC/耳机放大器, 支持DSD512和PCM32/768
UD-505是一款旗舰双单声道USB DAC，可容纳全平衡耳机放大器，它将高端的音频设计理念及TEAC几十年的音频设计经验压缩到一个A4尺寸的机箱中。
TEAC UD-505 USB DAC & Headphone Amplifier Ud-505-b_main

Like its predecessor models, the UD-501 and UD-503, it employs a dual monaural circuit design to process audio signals with even greater purity, with the latest VERITA AK4497 DAC chip used on each of the two channels. This improves the S/N (signal to noise) ratio by processing each channel individually in monaural mode, as well as delivering DSD512 (22.5MHz) native and 768kHz/32-bit PCM playback capabilities.
The Analog section, which is one of the keys to sound quality, includes four TEAC-HCLD buffer amp circuits process different drive modes, - fully-balanced drive for balanced output, and parallel drive mode for unbalance output, - to achieve enhanced acoustic expressive.
The headphone section is remarkable. A totally new 4.4mm headphone jack, called Pentaconn, is employed, allowing balanced and active ground connections within a single jack, while conventional 1/4" phone jacks are also provided.
In addition to a wide range of digital and Analog inputs, a Bluetooth:registered: receiver supporting LDAC:tm: and Qualcomm:registered: aptX HD:tm: allows you to enjoy high-quality wireless audio streaming from your smartphone on this flagship USB DAC.
The UD-505 is a compact and high-spec USB DAC and headphone amplifier that supports today’s high sampling rate Hi-Res formats.
如其前作UD-501和UD-503，它采用了双单声道线路设计来处理更纯净的音频信号，左右声道各配置有最新的DAC芯片VERITA AK4497，并通过各单声道方式处理达到更好的S/N比，同时实现了 DSD512 (22.5MHz) 和768kHz/32位PCM的原生播放。
模拟部分是音质的关键，包括4个TEAC-HCLD缓冲放大器电路处理不同的驱动模式——用于平衡输出的全平衡驱动和用于非平衡输出的并行驱动模式，以实现优异的音乐表现。
耳机部分尤其显著。采用全新的4.4毫米的Pentaconn 耳机插孔，可以通过这个插孔，实现平衡和有源接地的连接，同时也采用了传统的1/4"耳机插孔。此外，除了各种各样的数字和模拟输入外，还具备蓝牙:tm: 接收功能，支持LDAC:tm:和Qualcomm:registered: aptX HD:tm:，允许您透过智能手机在这台旗舰USB DAC上享受高音质的无线音频流。
UD-505是一款紧凑型的高规格的USB DAC和耳机放大器，支持当下高采样率高分辨率的格式。

TEAC UD-505 USB DAC & Headphone Amplifier Es_15211

TEAC UD-505 USB DAC & Headphone Amplifier Es_15212

Interested please feel free to contact:

Peter 012-2536225

Fong 016-3098668

Business hour:

MONDAY - 10AM-7PM

TUESDAY - 10AM-7PM

WEDNESDAY - CLOSED(PASAR MALAM)

THURSDAY - 10AM-7PM

FRIDAY - 10AM-7PM

SATURDAY - 10AM-7PM

SUNDAY - 1PM-6PM

PUBLIC HOLIDAY - 1PM-6PM

Style Online Store 24Hous

Location:

STYLE LASER AUDIO SDN BHD

No.148, Jalan Cerdas, Taman

Connaught, Cheras 56000 Kuala Lumpur

( NEXT TO ALLIANCE BANK )

TEAC UD-505 USB DAC & Headphone Amplifier Trade

TEAC UD-505 USB DAC & Headphone Amplifier Trade

We buy in your old items in CASH!!

Got something keep at home but seldom use or planning to upgrade?

Items that we buy:

Subwoofer

Integrated Amplifier

Speaker

CD player

AV Receiver

Please Whatsapp the item photo to me and get the price immediately, once confirmed the deal, we will pick up your item from you and pay you in cash.

Please visit [You must be registered and logged in to see this link.] find out more products for sale at very special price..

TEAC UD-505 USB DAC & Headphone Amplifier Es_15214

TEAC UD-505 USB DAC & Headphone Amplifier Es_15213

Spec description
Supported formats
USB input
PCM   16/24/32 bit
44.1k/48k/88.2k/96k/176.4k/192k/352.8k/384k/705.6k/768k Hz
DSD   2.8M/5.6M/11.2M/22.5M Hz
Coaxial digital input
PCM   16/24 bit
32k/44.1k/48k/88.2k/96k/176.4k/192k Hz
DSD   2.8MHz(supported with 176.4kHz/24-bit DoP format)
Optical digital input
PCM   16/24 bit
32k/44.1k/48k/88.2k/96k/176.4k/192k Hz
DSD   2.8MHz(supported with 176.4kHz/24-bit DoP format)
DAC section
USB DAC   Asahi Kasei Microdevices AK4497×2
Up-conversion   up to 384kHz/32-bit PCM, 22.5MHz DSD
Digital filters
PCM filters   Sharp Roll Off, Slow Roll Off, Short Delay Sharp, Short Delay Slow, Low Dispersion, off
DSD cutoff frequencies   Narrow : 39kHz (at 2.8M), 78kHz (at 5.6M), 156kHz (at 11.2M) or 312kHz (at 22.5M)
Wide : 76kHz (at 2.8M), 152kHz (at 5.6M), 304kHz (at 11.2M) or 608kHz (at 22.5M)
Audio inputs
USB   USB B port, USB 2.0, asynchronous mode transfer, bulk transfer
Compatible Software   TEAC HR Audio Player (Windows, Macintosh)
COAXIAL digital (rear)   RCA pin×1 (gold-plated)
Input level   0.5Vp-p
Input impedance   75Ω
Optical digital (rear)   TOS-link×1
Input level   -24.0 to -14.5dBm peak
Coaxial digital (front)   1/8” (3.5mm) mini*×1 (combined with optical digital input, detected automatically)
Input level   0.5Vp-p
Input impedance   75Ω
* 1/8” Mini - RCA conversion cable included.
Optical digital (front)   1/8” Mini Optical*×1 (combined with coaxial digital input, detected automatically)
Input level   -24.0 to -14.5dBm peak
Analog (rear)   RCA pin×1 pair (gold-plated)
Input impedance   24kΩ
Input sensitivity   130mV
Bluetooth

Bluetooth

version   4.0
Output class   Class2 (Range: approx. 33ft/10m)
Supported profiles   A2DP, AVRCP
Content protection   SCMS-T
Supported codec   LDAC

, Qualcomm

aptX

HD, aptX

, AAC, SBC
No. of paired device   maximum 8 devices
Audio outputs
XLR balanced   XLR×1 pair (gold-plated)
Output level   Fixed (0dB), fixed (+6dB), variable, output off (selectable)
Maximum output leve   2.0Vrms (1kHz, full scale, into 10kΩ, when set to fixed (0dB))
4.0Vrms (1kHz, full scale, into 10kΩ, when set to fixed (+6dB))
12.0Vrms (1kHz, full scale, into 10kΩ, when set to variable)
Output impedance   188Ω
RCA unbalanced   RCA pin×1 pair (gold-plated)
Output level   Fixed (0dB), fixed (+6dB), variable, output off (selectable)
Maximum output leve   2.0Vrms (1kHz, full scale, into 10kΩ, when set to fixed (0dB))
4.0Vrms (1kHz, full scale, into 10kΩ, when set to fixed (+6dB))
6.0Vrms (1kHz, full scale, into 10kΩ, when set to variable)
Output impedance   150Ω
Headphone outputs
Connector 1   1/4” (6.3mm) TRS stereo jacks×2 (gold-plated)
Polarity (balanced)   Tip: HOT, Ring: COLD, Sleeve: NC (GND)
Polarity (unbalanced)   Tip: L, Ring: R, Sleeve: GND
Connector 2   4.4mm 5-pole Pentaconn×1 (gold-plated)
Polarity (balanced)   Tip: L+, Ring1: L-, Ring2: R+, Ring3: R-, Sleeve: GND
Maximum output
Balanced   700mW + 700mW (into 32Ω)
Unbalanced   500mW + 500mW (into 32Ω×1)
350mW + 350mW(into 32Ω×2)
Active ground   500mW + 500mW (into 32Ω)
Supported impedances   16 to 600Ω
Clock section
Internal clock
Type   Crystal oscillator
Number of clocks   2 (44.1kHz and 48kHz)
External clock input
Connector   BNC (gold-plated)
Input frequency   10MHz
Input impedance   50Ω
Input level   Rectangle wave: equivalent to TTL levels
Sine wave: 0.5 to 1.0 Vrms
Audio performance
Frequency Response   10 to 80,000 Hz (+1/-3 dB, 192kHz PCM input, RCA output, digital filter off)
Total harmonic distortion   0.002% or less (192kHz PCM input, RCA output, digital filter off)
S/N ratio   110dB or higher (192kHz PCM input, RCA output, digital filter off)
Power supply
US/Canada   AC 120V 60Hz
UK/Europe   AC 220 to 240V 50Hz
Power consumption   18W (0.4W in standby)
dimensions (including protrusions)   290(W)×84.5(H)×248.7(D) mm / 11.4”(W)×3.3”(H)×9.8”(D)
Weight   4.2kg / 9.3lbs

Thanks for viewing.

[You must be registered and logged in to see this link.]