Leak 2200 amplifier (used)
Hi-Fi 4 Sale - Malaysia / Singapore Audio Forum & Marketplace | www.hifi4sale.net :: Audio & Video Equipment Marketplace :: Audio & Video Equipment: FOR SALE (Pre-owned & Used)
Page 1 of 1
Leak 2200 amplifier (used)
https://i.servimg.com/u/f37/15/07/35/14/p1000410.jpg
https://i.servimg.com/u/f37/15/07/35/14/p1000411.jpg
https://i.servimg.com/u/f37/15/07/35/14/p1000412.jpg
https://i.servimg.com/u/f37/15/07/35/14/p1000413.jpg
https://i.servimg.com/u/f37/15/07/35/14/p1000414.jpg
https://i.servimg.com/u/f37/15/07/35/14/p1000415.jpg
https://i.servimg.com/u/f37/15/07/35/14/p1000416.jpg
Vintage Leak amplifier
Model: 2200
Made: England
Phono: yes
Condition: 6/10 (due to age and in ori condition)
Price: RM1600
Location: subang jaya
Contact: 010-3245434
come with DIY five-pin DIN sockets to RCA and two pails of DIN polarised sockets for connecting two or four loudspeakers.
The Integrated Amplifier from which the tradition since point one was inherited.
The output stage of pure complimentary OCL and the constant current drive type Class-A driver stage are used for a power amplifier part, and it is designed carry out the stable operation influenced by neither a temperature change, nor a load variation, a shocking noise, etc. by applying the deep stable direct current NFB.
The protection network which protects a loudspeaker and an output transistor in case of outages, such as output-terminal short-circuit and an excessive input, is prepared.
Since the circuitry which has a difference input in the equalizer stage is used and the direct current NFB is applied to the overall, the operation stabilized strongly shockingly has been realized.
functionalities, such as the BTL circuitry which even a switchpoint comes out and can take out a monophonic output, and a loudspeaker matrix switch which can take out the hole tone effect, are carried
Form Stereo Integrated Amplifier
Output 45W+45W (both channel operation, 8 ohms, THD 0.5%)
Single channel output 120W
A total harmonic distortion 0.01% (1W, 1kHz)
0.1% (45W, 1kHz)
0.1% (1W, 10kHz)
Cross modulation distortion 0.1%(70Hz:5kHz=4:1)
Output bandwidth 10Hz - -40kHz two dB (both channel operation, 45W)
Dumping factor 40(80Hz)
Remains noise 1.5mV (volume maxima)
Input sensitivity/impedance Disc: 2.5mV, 6.5mV/47kohm
Tape, Cassette, AUX:150mV/100kohm
SN ratio Disc:-65dB
Tape, Cassette, AUX:-80dB
Allowable input Disc:+35dB
Sound-recording output 150mV
Tone control Treble: }13dB (15kHz)
Bass: }13dB (50Hz)
Filter High: -3dB (5kHz), -10dB (10kHz)
Row: -3dB (70Hz), -10dB (50Hz)
Dimensions Width 408x height 132x depth of 313mm
Weight 9kg
https://i.servimg.com/u/f37/15/07/35/14/p1000411.jpg
https://i.servimg.com/u/f37/15/07/35/14/p1000412.jpg
https://i.servimg.com/u/f37/15/07/35/14/p1000413.jpg
https://i.servimg.com/u/f37/15/07/35/14/p1000414.jpg
https://i.servimg.com/u/f37/15/07/35/14/p1000415.jpg
https://i.servimg.com/u/f37/15/07/35/14/p1000416.jpg
Vintage Leak amplifier
Model: 2200
Made: England
Phono: yes
Condition: 6/10 (due to age and in ori condition)
Price: RM1600
Location: subang jaya
Contact: 010-3245434
come with DIY five-pin DIN sockets to RCA and two pails of DIN polarised sockets for connecting two or four loudspeakers.
The Integrated Amplifier from which the tradition since point one was inherited.
The output stage of pure complimentary OCL and the constant current drive type Class-A driver stage are used for a power amplifier part, and it is designed carry out the stable operation influenced by neither a temperature change, nor a load variation, a shocking noise, etc. by applying the deep stable direct current NFB.
The protection network which protects a loudspeaker and an output transistor in case of outages, such as output-terminal short-circuit and an excessive input, is prepared.
Since the circuitry which has a difference input in the equalizer stage is used and the direct current NFB is applied to the overall, the operation stabilized strongly shockingly has been realized.
functionalities, such as the BTL circuitry which even a switchpoint comes out and can take out a monophonic output, and a loudspeaker matrix switch which can take out the hole tone effect, are carried
Form Stereo Integrated Amplifier
Output 45W+45W (both channel operation, 8 ohms, THD 0.5%)
Single channel output 120W
A total harmonic distortion 0.01% (1W, 1kHz)
0.1% (45W, 1kHz)
0.1% (1W, 10kHz)
Cross modulation distortion 0.1%(70Hz:5kHz=4:1)
Output bandwidth 10Hz - -40kHz two dB (both channel operation, 45W)
Dumping factor 40(80Hz)
Remains noise 1.5mV (volume maxima)
Input sensitivity/impedance Disc: 2.5mV, 6.5mV/47kohm
Tape, Cassette, AUX:150mV/100kohm
SN ratio Disc:-65dB
Tape, Cassette, AUX:-80dB
Allowable input Disc:+35dB
Sound-recording output 150mV
Tone control Treble: }13dB (15kHz)
Bass: }13dB (50Hz)
Filter High: -3dB (5kHz), -10dB (10kHz)
Row: -3dB (70Hz), -10dB (50Hz)
Dimensions Width 408x height 132x depth of 313mm
Weight 9kg
joe79- Dealer\Reseller\Trader\Service Provider
- Number of posts : 381
Age : 45
Location : selangor,subang jaya
Registration date : 2010-04-06
Similar topics
» Leak 2200 Amplifier
» AKAI AT-2200 Tuner & AM-2200 Stereo Amplifier
» Sansui AU 2200 Amplifier (Sold)
» DENON POA-2200 power amplifier
» Perreaux 3370 Stereo Amplifier SGD $2200.00
» AKAI AT-2200 Tuner & AM-2200 Stereo Amplifier
» Sansui AU 2200 Amplifier (Sold)
» DENON POA-2200 power amplifier
» Perreaux 3370 Stereo Amplifier SGD $2200.00
Hi-Fi 4 Sale - Malaysia / Singapore Audio Forum & Marketplace | www.hifi4sale.net :: Audio & Video Equipment Marketplace :: Audio & Video Equipment: FOR SALE (Pre-owned & Used)
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum