Bryant Nema power cord (Used)

by **sollehah** Fri Jun 12, 2009 5:39 am

A Piece of High Performance BRYANT NEMA U.S. 3 Pin Mains Power Cable (OFC Core) Made in U.S.A.

Bryant Nema power cord (Used) Cord1110

This high quality AC power cable handles high current and effectively reduces noice of entire system. A perfect match to amplifier and any Hi-Fi component. All this while we have been using this power cable on a power hungry Krell KSA-300S 300Watts "Pure Class-A" power amp (picture below) with very good result.
Krell KSA-300S requires a minimum of 1,750W of High Current which passes through this Bryant Nema power cord for the past 3-years with satisfying performance.

Bryant Nema power cord (Used) Krell_12

We won't use any other low quality power cable which could restrict the flow of High Current (min. 1,750W) to the massive 200lb./90kg. Krell power amp, hence will damage it.

This made in U.S.A. Bryant Nema power cord 2.0m performs its task on the Krell KSA-300S with admirable precision.

It retails for over RM1,000.00

Plugs

BRYANT NEMA 5-15 15A 125V U.S. type 3 Pin mains plug to IEC 10A 250V plug.
Conductor material: Copper.

Cable

Oxygen free copper core (fully shielded)
Cable O.D.: 2 inches or 5 cm diameter (very thick cable)
Vol/Amp: 100V~250V 15A
Cable length: 2.0m
High Electrical Voltage power cord suitable for power hungry amps eg. Krell, Mark Levinson, etc.

Remarks:

A perfect match to high wattage / high current power amplifiers.

Selling: RM550. Email: rjzarina@yahoo.com or Call/SMS 019-3464456 for immediate response as I prefer this way to communicate with genuine potential buyer.

Visit my Lelong Store: Bryant Nema power cord (Used) Vms

25,137 visitors since 28 November 2006
View Seller's other items on eBay:

Sollehah's e-STORE