Sequence Flat Panel Tower Speaker model 40(Used)

by **HiFiLab** Sun May 06, 2012 6:26 pm

Sequence Flat Panel Tower Speaker model 40(Used) P1120320

Sequence Flat Panel Tower Speaker model 40(Used) P1120321

Made In England

- LF/MF radiator: I25mm doped fibrous cone
- HF radiator: 25mm composite cone
- Frequency response: 45Hz-20kHz
- Sensitivity: 87dB for 1 Watt at 1 metre
- Suggested amplifier: 20-100W/channel
- Nominal impedance: 8 Ohms

Designed by Paul Burton,

The slim construction, as well as avoiding the sonic drawbacks inherent in a conventional box, has produced a system which is extremely easy to integrate into the modern living-room. The response has been tailored to suit placement on or very close to a wall. The solid back radiates practically no sound energy and the drive units, mounted tweeter above woofer at one end of the front baffle, produce even dispersion over a wide frontal arc.

Hanging the speakers on the wall like pictures does a great job of keeping the room free of clutter, and would be specially appropriate in an audio/visual set-up for stereo or surround-sound related to the TV screen.

midrange response is very smooth and there is admirable presence making vocal music and piano, for example, come very much to life. Indeed all kinds of music, pop and classical, benefit from this lively midrange clarity. The Sequence is primarily designed for fairly small rooms where the bass roll-off will be much less marked. It then becomes a speaker for all situations in the ease with which it can be driven to quite high volumes by modest amplifiers. The makers suggest a power rating from 20 Watts per channel upwards

Price RM 980

Contact Simon Ting 012-3612507