M2TECH EvoSupply Lithium Ion PSupply for All EVOItems (New!)

Introducing :
M2TECH EVO SUPPLY


Seen on the Right (Shown with :[Left] Hiface Evo Sold Seperately)

A Low Noise Lithium Power Supply for All M2Tech Evo Devices as well as other 9v Operated Devices,
The Evo Supply introduces pin drop silence to your music, as well as extended highs and stout bass lines
when operated in tandem with

The HifaceEVO - An Groundbreaking Digital to SPDIF Converter
http://www.hifi4sale.net/t27036-m2tech-hifaceevo-made-in-italy-usb-to-spdif-converter-new#65990

The HifaceEVO & EvoDAC - Powerful D-to-D and D-to-A Converter Combo (Evo Supply Powers Both Devices)
http://www.hifi4sale.net/t27930-m2tech-evodac-32-bit-192-khz-digital-to-analog-converter-combo-new#67795

The EvoClock - Precision Master and World Clock
http://www.hifi4sale.net/t27931-m2tech-evo-clock-for-any-dac-or-hiface-evo-new#67796


Evo Supply features a Li-Ion battery with 2200mAh capacity (minimum), an integrated battery charger and a low-noise regulator which is used to provide current to the load while the battery is being charged, thus ensuring continuous operation to the load. Charge time is about three hours, the best choice to ensure a long battery life.

Evo Supply delivers up to 1A (peak) on 9V (low-noise regulator) or on 9.5V to 11V (battery). Two outputs are available for more versatility. A switch allows for turning the load off when not used to save on battery charge. Another switch allows to select the operation mode: automatic charge or charge inhibit. Two leds indicate the presence of the wall adaptor and the charge in progress. In automatic charge mode the battery charger starts charging the battery every time the battery voltage drops below a low threshold. During the charge, the low-noise regulator feeds current to the load. At the end of the charge process, the output reverts to the battery. In charge inhibit mode, the battery is used down to the low threshold and then the load is disconnected to avoid excessive depletion. Charge is then started by switching to automatic charge mode. The battery is protected against overcharge, overcurrent and excessive depletion. A 15V/2A detachable wall adaptor provides current for battery charging and load powering when the battery is being charged. The user may disconnect the wall adaptor after battery is fully charged in order to reduce interferences to a minimum.

Evo Supply features heavy duty output connectors for reliable contacts Two cables terminated with 5.5/2.1mm plug (positive on tip) and a universal power wall adaptors are included in the package.



FEATURES

1) LONG BATTERY DURATION: around 7 hours when powering the hiFace Evo.
2) VERY LOW NOISE even when using the internal regulator.
3) STYLISH ALUMINUM CASE matches the look of the hiFace Evo.

SPECIFICATIONS

Size: 105x46x104mm (w x h x d, case) 105x50x150mm (w x h x d, total)
Weight: 500g (800g with wall adaptor)
Supply voltage: 15VDC
Supply current: 2A peak
Output voltage: 9-11V (battery directly connected to output)
Output current: 1A peak, 500mA continuous
Inputs: supply on 5.5/2.1mm socket (positive on tip)
Outputs: 2 x Bulgin heavy duty female connectors

PRICE :
RM 1695.00 (with Wallwart Power Supply)

100% Made in Italy

Available ONLY at Authorized Dealers Below :

Kuala Lumpur / Selangor
Acoustique Systems
Amcorp Mall
Mr.C.N.LIM (H/P : 012-3393738)

Penang
(December 2012 ,
New Retailer is in the midst of re-appointment or if you are a Retailer please
contact us at ganesh[at]tridentmalaysia[dot]com if you are current owner
of any M2TECH product in Penang and need support please do not hesitate to
email us)

"Any Queries (Distribution and Sales)
Feel Free to PM me on Hifi4Sale.net"
- Quinta


BEWARE OF PIRATED MADE IN CHINA CLONES THATS PRICED THE SAME,
LOOKS THE SAME, BUT DOES NOT SOUND THE SAME.

We are the Official Distributor for All
M2TECH Products in Malaysia