Acurus L10 Line Preamplifier & Acurus A250 Power Amplifier

by **raymond88** Wed Jun 10, 2020 1:39 am

Item: Acurus L10 Line Preamplifier & Acurus A250 Power Amplifier

Condition: 7.5/10. Item is in very good working condition.

Acurus L10 Line Preamplifier

They said that the Acurus L10 OUTPERFORMED the $4,500 KRELL Preamp in terms of Flatter Frequency Response, Better Channel Separation/crosstalk, and Less Noise/THD!!!

This line level preamp is extremely simple, as preamps ought to be, and is ultra clean with regards to both signal performance and physical condition. The topology was designed by a former Krell engineer (William Snyder). It utilizes a fully discrete power supply regulator with no global feedback and fully discrete line stage topology. Neutral, transparent - the way the music was meant to be heard!

Very intelligent and solid build. Five identical knobs arranged symmetrically across the thick anodized aluminum faceplate: 1 -- Off/On/Mute 2 -- Volume 3 -- Balance 4 -- Listen Switch 5 -- Record Switch

Specifications: Frequency Response -- 20 to 20000 Hz +0.0, -0.15 dB Total Harmonic Distortion -- 0.06% Signal to Noise Ratio -- 95 dB, A weighted High Level Sensitivity -- 60mV Maximum Output Voltage -- 8 Volts RMS Voltage Gain at Full Volume -- 18.8 dB Input Impedance -- 10K ohms Output Impedance -- 47 ohms Tape Outputs

Acurus A250 Power Amplifier

Overview

When the A250 was introduced into the hifi World many years ago, it garnered so much positive reviews that some even ventured to say that this was the best value 250W power amp for under $1000. Even to this day, you will be hard pressed to find another 250W amp that is under $1000 and sound better than the Acurus. At under $500 now, this is a bargain. Bass notes was probably the most impressive thing about this amp. It was deep and tight and was accompanied by a very full sized mid-range. It wasn’t thin or dry like some competing amps but was instead robust and full of flavor. The mid-range isn’t as sweet as a comparable tube amp but was warm sounding enough to make you give this amp another listen.

Description :
The most powerful two-channel piece from the first generation of Acurus branded amplifiers. This top of the Acurus line amplifier utilized a fully discrete input and driver stage that can drive very low impedance loads effectively. Other beefy features were the 1,000 VA toroidal transformer and over 6 square feet of heat sink.

Specifications :
Power output....................................250 Watts at 8 ohms
Power output....................................350 Watts at 4 ohms
THD.................................................0.06%
S /N Ratio........................................110dB A Weighted
Input sensitivity.................................1.2 volts for full output
Main voltage AC................................240 VAC, 50 to 60hz.
Power consumption..........................1200 Watts (Maximum)

Price: sold

Contact: 012-3816611

Click here to Whatsapp:

http://wasap.my/60123816611

Website:

http://www.hifi-review.com/153494-acurus-a250.html

https://www.audioasylum.com/reviews/Amplifier-SS/Acurus/A250/general/23067.html

Acurus L10 Line Preamplifier & Acurus A250 Power Amplifier Acurus10

VIEW ALL MY OTHER STUFFS BY CLICKING BELOW:

https://my.carousell.com/hifijunction/
https://my.carousell.com/hifijunction/
https://my.carousell.com/hifijunction/

Thank you

by **raymond88** Wed Jun 17, 2020 10:48 am

Acurus L10 Line Preamplifier & Acurus A250 Power Amplifier

Acurus L10 Line Preamplifier & Acurus A250 Power Amplifier

Overview

Re: Acurus L10 Line Preamplifier & Acurus A250 Power Amplifier