draftitems

CAN VIEW ALL MY ITEMS HERE:

https://www.carousell.com.my/u/hifijunction/
https://www.carousell.com.my/u/hifijunction/
https://www.carousell.com.my/u/hifijunction/

Thank you


VIEW ALL MY OTHER CABLES BY CLICKING BELOW:

https://www.carousell.com.my/u/myusedcables/
https://www.carousell.com.my/u/myusedcables/
https://www.carousell.com.my/u/myusedcables/


Thank you

***************

Item: THETA Digital Enterprise Monoblocks Power Amplifier- 300W

Condition: 8.5/10. Item is in excellent condition. The Enterprise will mesmerize you with clarity and definition. With huge and deep soundstage.


(Retail when new $ 9000. US pair)


Price: RM  or swap/topup
Can Trade-In your Amplifier/
CD Player/Speakers/Etc

Contact: 012-3816611

Wasap.my/60123816611


The Enterprise is a 300 Watt monoblock power amplifier, based on the original Citadel and the Dreadnaught II. It benefits from the knowledge, research and dedication that Theta Digital brought to those superlative designs.

The heart of the Enterprise is its fully-balanced differential, zero-feedback circuitry, with meticulously selected solid-state devices throughout. We scrutinize the selection to optimize component parts in each and every stage, and for the performance of the amplifier as a whole.

The sound is similar to the original Citadel amps in veracity and intimacy with the musical experience, and in the prospect of movie performance that will make your home theater your favorite movie palace.

The audio board is a four layer glass-epoxy circuit board: one layer each for positive and negative supply lines, one layer for ground plane, and one layer for the signal path. Its transistors are the same ultra-fast devices that helped give the original Citadel and the Dreadnaught II their superlative sonic signature. The Enterprise uses the same bridge rectifier, mother board, and capacitive banks as the original Citadel did!

Its output power supply uses a single, high-current 480 Watt toroid transformer, which feeds an ultra-fast / soft-recovery 35 Amp full bridge rectifier. The power supply lines are then filtered by two capacitive banks totaling a hefty 80,000 uF. The sonic result of these very clean supply lines to the output transistors is exceeded only by the original Citadel on which it was modeled.

The Enterprise is an exercise in delivering tremendous power with absolute integrity.

Analog Audio Inputs
1 Single-ended RCA jack.
1 Balanced (XLR) jack.

Input Impedance
50KOhm. Single-Ended or Balanced,
for each phase.

Input sensitivity
(Single-Ended) 2.8V RMS input for 300W into 8 ohms.
(Balanced) 1.4V RMS input for 300W into 8 ohms.

Gain
(Single-Ended) 25dB (18x).
(Balanced) 31dB (36x).

Polarity
(Single-Ended) Non-Inverting.
(Balanced) Pin-2 = Positive, Pin-3 = Negative for Non-Inverting Output.


Analog Audio Outputs
1 balanced output (Cardas Type standard); optional second balanced output for bi-wiring. (Can be Cardas type or Reich type)
I / O RS232
1 DB9 and 1 RJ45 connector.

Modes/Processes
Standby: Amplifier is muted and output bias is reduced to 10%.
Thermal: Channel has overheated; amp automatically switches to Standby.

Power Output
(8 ohms) 300 W (rated) 350 W (typical)
(4 ohms) 500 W (rated) 525 W (typical)

Frequency Response
(-3dB points @ full power) 0.5 Hz - 400 KHz.
THD+Noise<1.75%

Signal to Noise Ratio
(unweighted) >105dB


Miscellaneous

Power Requirements
117 VAC, 10A Slo Blo main fuse, 230 VAC, 6A Slo Blo main fuse, 50-60 Hz.

Power Consumption
30W @ Standby; 53W @ idle; 525W @ full power into 8 Ohms; 925W @ 4 ohms.

Trigger Input
5-12 VDC Pulse between 1 and 500mS.

Dimensions
9 1/16" W x 13 7/8" H x 23 5/8" D (230 x 346 x 600 mm)




Website:

https://www.ukaudiomart.com/details/649349589-theta-digital-enterprise-300-watt-worldclass-monoblocks-reduced-price/

https://www.audiogon.com/listings/lis9ahj2-theta-digital-enterprise-mono-blocks-300-watt-mono-amplifiers-excellent-condition-1-p-solid-state

https://www.usaudiomart.com/details/649173181-theta-enterprise-350-watt-mono-amplifiers/

https://tmraudio.com/blog/the-gearhead-theta-enterprise-mono-power-amps/

https://www.stereophile.com/solidpoweramps/304theta/index.html

https://www.stereophile.com/content/theta-digital-enterprise-monoblock-power-amplifier-specifications




SEE ALL MY AVAILABLE ITEMS HERE:



https://www.carousell.com.my/u/hifijunction/
https://www.carousell.com.my/u/hifijunction/
https://www.carousell.com.my/u/hifijunction/

Thank you


****************


Item: Primare I30 Integrated Amplifier - 100W

Condition: 9/10. Item is in MINT condition. No dents or scratches. Comes with brand new unused original remote control. With original box and power cable.

Retail Price: £1,750.00


Price: RM4200 or swap/topup
Can Trade-In your Amplifier/
CD Player/Speakers/Etc

Contact: 012-3816611

Wasap.my/60123816611


"The I30 is one of the cleanest, most informative amps available below the three grand mark. Its 100 watt per channel output may not seem particularly impressive, but the I30 still delivers the seismic dynamic shifts of Holst's Mars with real conviction and composure. The sound doesn't harden up at even high volume levels: the amplifier carries on delivering crescendos with no sign of buckling under the pressure."
From the Manufacturer:
"The I30 is an integrated preamplifier and power amplifier with extraordinary performance for its price.
High-performance power amplifier
The amplifier is capable of delivering 100 watts into an 8 ohm load and 180 watts into a 4 ohm load. Its robust topology means that loudspeakers will always receive a highly stable and symmetrical signal. Even so, special care has been taken to protect loudspeakers against faulty input signals. Four individual DC-servos together with DC-blocking and protection circuit provide this state of the art protection.
Careful design for operational stability
As with all Primare units, the I30 is housed in an alloy heavy gauge steel chassis, which provides strength, rigidity, and screening, while being effective at damping vibrations from external sources.
Display and audio circuits are isolated
The front panel design isolates the display circuitry from the audio circuitry to avoid interference
Fully balanced Dual-Mono design
The I30 provides the opportunity to enjoy the benefits of ultra-low noise ‘balanced’ signal transfer, of the kind employed by recording engineers. It is fully balanced all the way from the balanced (XLR) inputs to the speaker outputs.
Balanced signal transmission means that two signal lines are used per channel, which carry the same signal with opposite phase. On the receiver side the signals are mixed, and since any interference that has arisen during the transmission will be present in both lines with identical phase, such noise and distortion products are cancelled out leaving only the pure original signal. Balanced connection therefore keeps the signal as free as possible from interference.
The I30 is a dual-mono design, ensuring that each channel remains electrically independent and identically resourced throughout. Each channel has its own identical, dedicated mono amplifier incorporating a heavy-duty custom-made toroidal transformer and low noise regulated power supplies.
To increase the dynamic range, the input buffers and the unbalanced to balanced conversion stage have been improved with the use of Burr-Browns OPA2134, one of the best operational amplifiers available.
Clean power supply for the best possible performance
Each part of an electronic design has specific power requirements. Primare’s forensic approach to ensuring that clean power is supplied throughout the design is a key part of its design philosophy and has significant sonic benefits.
The amplifier uses one separate power transformer for each channel. The rectification and regulation is ‘floating ground’ configured instead of the standard ‘fixed ground’ approach. This is to keep any disturbance and hum as low as possible. The driver stage and preamp stage are individually regulated, so is the digital supply to the front panel. Ten individual power regulators are used, an unusually high number for an integrated amplifier.
Shortest signal paths
Special care has been taken while designing the circuit to keep the signal path as short as possible. SMD components, including excellent 1% MELF–type resistors are used whenever possible.
Precise volume control
Four digital volume controls, two per channel, are used to ensure a precise channel balance and a flat frequency response at any volume level
Clean input switching
The input signal switching is carried out with solid-state relays, which give a much higher performance than the more commonly used C-Mos switches.
For special applications a 180 degrees phase shift function is provided.
Flexible inputs and outputs
The amplifier incorporates two sets of balanced inputs (XLR) and four gold-plated unbalanced inputs (RCA) for CD, Tuner, Aux and Tape. A Preamp Output is provided for bi-amping configurations and a record output is provided.
The amplifier incorporates the massive high quality gold-plated speaker terminals suitable for most audiophile speaker cables.
Intuitive user interface
In keeping with the philosophy of the Primare range of systems, the I30 can be controlled through a very simple and intuitive set of front panel controls.
Alternatively all the functions of the I30 can be controlled by the C22 RCU supplied, or by using the optional C32 RCU.
Although the I30 is flexible enough to work with virtually any other equipment you have in your system, it is ideal for use with the other products in the Primare range, such as the Primare CD31 CD Player. A particular benefit of using the I30 with other Primare sources is that you can control your entire system with a single remote control, to give you a fully integrated system with the simplest possible user interface." 
Specifications:
Output power per channel: 2 x 100W into 8Ω, 2 x 180W into 4Ω
Speaker terminals: 4 –16Ω
Output impedance: <0.06Ω
DC offset: <3mV
Balanced inputs: 560mV
Line inputs: 280mV
Tape outputs: 280mV
Frequency response: <10Hz – 100kHz, -3dB
THD: <0.07% at full power
Signal-to-noise, line: -100dB (A-weighted)
Voltage: 100/115/230V
Power consumption: 600W max
Peak current: ±40A
Dimensions: (WxDxH) 16.92" x 14.76" x 3.93" (430 x 375 x 100mm)
Weight: 34.17 lbs / 15.5kg


Website:

https://www.hifix.co.uk/primare-i30-amplifier

https://www.whathifi.com/primare/i30/review

http://www.audioreview.com/product/amplification/integrated-amplifiers/sumiko-primare/i30.html

https://www.theabsolutesound.com/articles/primare-130-integrated-amplifier-and-cd31-compact-disc-player-1

http://www.hifi-review.net/310-primare-i30.html



SEE ALL MY AVAILABLE ITEMS HERE:



https://www.carousell.com.my/u/hifijunction/
https://www.carousell.com.my/u/hifijunction/
https://www.carousell.com.my/u/hifijunction/

Thank you


****************

Item: Luxman C03B Pre Amplifier 

Luxman C-03 is a high fidelity preamplifier with a pure Class A output stage and a world-class phono stage.

Preamp:
C-03B: A high-end preamp with lots of controls, separate power supplies for equalizer, phono and Video amplifier. Tons of inputs, filters and outputs. Solid build. The C-03 is a slimline preamp with Class A all over its circuits and low-impedance outputs. Two shortcuts allow the signal to go faster : Phono Straight bypasses the input selector, tone controls, balance control and... subsonic control ! CD straight does the same thing. MICA condensers, copper foiled caps, + and - tensions fed by separate windings everywhere plus the STAR grounding circuit (each block has its own ground and power supply for less mutual interference) and Duo-ßeta for optimal levels of negative feedback.
Discrete components throughout.The C-03 has three video inputs and one video output, all composite, hooked to a Video 2 (play only) and Video 1 (rec/play) audio terminals - on top of the two strictly audio tape loops.


Condition: 8/10. Item is in excellent condition. No dents or scratches. Comes with power cord.

Price: RM1800 or swap/topup
Can Trade-In your Amplifier/
CD Player/Speakers/Etc

Contact: 012-3816611

Wasap.my/60123816611



Website:

https://audiophillness.com/luxman-c-03/

https://www.stereonet.com/forums/topic/298990-fs-luxman-c-03b-stereo-preamplifier/

https://www.audio-high-store.com/luxman-c-03/


SEE ALL MY AVAILABLE ITEMS HERE:



https://www.carousell.com.my/u/hifijunction/
https://www.carousell.com.my/u/hifijunction/
https://www.carousell.com.my/u/hifijunction/

Thank you

****************

Item: Primare CD-31 High-End CD Player - Sweden

Condition: 8.5/10. Item is in like-new condition. No dents or scratches. Comes with original box, original remote control and accessories.

Price: RM4200 or swap/topup
Can Trade-In your Amplifier/
CD Player/Speakers/Etc

Contact: 012-3816611

Wasap.my/60123816611



Every component of the CD31, from the CD transport to the audio output stage, has been designed to achieve the highest possible audio performance. The Primare CD31 Compact Disc Player uses an advanced DVS mechanism. As with all Primare units, the CD31 Compact Disc Player is housed in an alloy heavy gauge steel chassis, which provides strength, rigidity, and screening, while being effective at damping vibrations from external sources. The front panel design isolates the display circuitry from the audio circuitry to avoid interference

From the CD-transport Primare have extracted the SPDIF signal, which is fed to a DIR1703 digital receiver. DIR 1703 has excellent jitter suppression abilities ensuring that the DACs receive as clean a digital signal as possible - giving the most natural sound. We have chosen not to incorporate any other signal treatment such as up-sampling, which can colour the sound.

For precise digital to analogue conversion, the CD31 uses four 24 bit/96 kHz Burr-Brown PCM1704 K-graded DACs - one of the best analogue to digital converters available today. The DAC´s are configured in a truly balanced configuration: two DACs per channel. Each DAC carries the same signal with opposite phase. On the receiver side the signals are mixed, and since any interference that has arisen during the transmission will be present in both lines with identical phase, such noise and distortion products are cancelled out leaving only the pure original signal. Each DAC uses its own current to voltage converter stage, Burr-Brown's OPA2134, a sonically excellent operational amplifier. The signal path is finished in a single-ended output stage with a discrete MosFet transistor driven by an active current source instead of the use of passive resistors.

Each part of an electronic design has specific power requirements. Primare's forensic approach to ensuring that clean power is supplied throughout the design is a key part of its design philosophy and has significant sonic benefits. An internal mains filter ensures that any high frequency disturbance is removed before it reaches the power transformer, which is placed as far away as possible from the delicate analogue circuits. The player incorporates a fantastic R-core transformer with separate windings for all of the player's different power requirements (mechanical, analogue, digital, etc) - eight in all! Each is individually regulated in thirteen steps to ensure that enough power is constantly available. For the critical analogue audio stage, the player incorporates ultra-fast discrete power regulation, ensuring that enough regulated power is available for even the deepest sonic transient that can be recorded on a compact disc.

This power supply configuration together with different ground planes for all kinds of signal layers gives the player the usually extremely high signal to noise ratio allowing you to take full advantage of the dynamic range possible with CD.

[*]The analogue output provides for both the recommended balanced XLR outputs and the conventional unbalanced RCA for connection with an appropriate stereo amplifier.

[*]The CD31 Compact Disc Player provides one Coaxial 75 ohm SPDIF, one optical TOSlink and one professional XLR 110 ohm AES/EBU digital output

[*]The DATA input is intended for use with future products.

[*]The RS232 port will allow you to connect to a home automation installation systemIR

[*]The CD31 can be controlled by using the IR-input on the back panel.

[*]Intuitive user interface designed so that it will not distract you from the pleasure of listening to music on your system.

[*]The main functions of the CD31 Compact disc player can be accessed using the 6 front panel push buttons.

[*]

Website:

https://www.hifix.co.uk/primare-cd31-cd-player

https://www.stereophile.com/cdplayers/707pri/index.html

https://primare.net/wp-content/uploads/2017/06/CD31-Tech-paper.pdf



SEE ALL MY AVAILABLE ITEMS HERE:



https://www.carousell.com.my/u/hifijunction/
https://www.carousell.com.my/u/hifijunction/
https://www.carousell.com.my/u/hifijunction/

Thank you


****************

Item: PMC Centre Speaker

Condition: 8.5/10. Item is in excellent condition. No dents or scratches. Comes with 

Price: RM  or swap/topup
Can Trade-In your Amplifier/
CD Player/Speakers/Etc

Contact: 012-3816611

Wasap.my/60123816611



Website:



SEE ALL MY AVAILABLE ITEMS HERE:



https://www.carousell.com.my/u/hifijunction/
https://www.carousell.com.my/u/hifijunction/
https://www.carousell.com.my/u/hifijunction/

Thank you

****************

Item: PMC DB1 Bookshelf Speakers

Condition: 8.5/10. Item is in excellent condition. No dents or scratches. Comes with 

Price: RM  or swap/topup
Can Trade-In your Amplifier/
CD Player/Speakers/Etc

Contact: 012-3816611

Wasap.my/60123816611



Website:



SEE ALL MY AVAILABLE ITEMS HERE:



https://www.carousell.com.my/u/hifijunction/
https://www.carousell.com.my/u/hifijunction/
https://www.carousell.com.my/u/hifijunction/

Thank you


****************

Item:

Condition: 8.5/10. Item is in excellent condition. No dents or scratches. Comes with 

Price: RM  or swap/topup
Can Trade-In your Amplifier/
CD Player/Speakers/Etc

Contact: 012-3816611

Wasap.my/60123816611



Website:



SEE ALL MY AVAILABLE ITEMS HERE:



https://www.carousell.com.my/u/hifijunction/
https://www.carousell.com.my/u/hifijunction/
https://www.carousell.com.my/u/hifijunction/

Thank you

Bump

Bump

Bump

Bump