Bel Canto 3.7 DAC with Bel Canto VBL1 power supply unit - SOLD

Bel Canto 3.7 DAC with Bel Canto VBL1 power supply unit    
    In good condition 8.5/10
    Complete with Original Remote and box.
    Single owner unit.

Selling for RM5190 (SOLD)
Contact Peter 012-3820333
Trade in / swap available

Bel Canto's DAC3.7 offers full system control and a range of features, including an analog input. 

With a dedicated volume control, the DAC3.7 can also be used as a preamplifier. The Bel Canto Dual-Differential DAC3.7 Control Center boasts an impressive dynamic range of 126dB, along with Bel Canto's proprietary digital-to-analog converters. 

Equipped with five 24/192 digital inputs, high-speed ST fiber, and a 24/192 ADC analog input, the DAC3.7 manages all your audio sources, including an analog input for a phono preamplifier or home theater bypass. 

The front panel features a multifunctional control knob for input selection and volume control for both the "main source" and the front panel headphone jack. 

The dedicated DAC/amplifier for the headphone jack optimizes the signal path. A clear and user-friendly display allows you to check balance, phase, rename inputs, and turn off unused inputs. 

At the core of the DAC3.7 is the 'jitter-elimination' Master Reference Ultra-Clock circuitry, reducing jitter from all sources below the audible limit. 

The 24-bit digital volume control maintains transparency and accuracy throughout its range. 
Custom 0.1% audio quality resistors, Class-A output circuitry, and a low-noise power supply care housed in a rugged all-steel chassis to prevent mechanical resonance. 

The internal VB supply, powered by the Bel Canto VBL1 virtual battery supply, features 400,000 uF of filter capacitance and ultra-low noise isolated switching for the analog section, preventing current distortion in the sensitive signal path.

Specification 
DAC
Digital Section:
Maximum Data Input Rate: 24bit Data at 192KS/s: AES XLR, SPDIF BNC/RCA, ST Fiber, TOSLINK
Master Clock Jitter: 70 femtoseconds RMS, 100Hz-1MHz

Analog 24/192 DAC Section:
Maximum Output: 5.5 Vrms balanced XLR, 2.5 Vrms RCA
Output Impedance: 200 ohms balanced XLR, 100 ohms RCA
Frequency Response: 20 Hz-20 KHz, +/- 0.25dB
THD+N: <0.0015%, 5.5Vrms balanced out, 1KHz
Output Noise: 3uVrms A-weighted 20Hz-20KHz
Dynamic Range: 126dB A-weighted 20Hz-20KHz

Analog 24/192 ADC Section:
Maximum Input: 2.5 Vrms RCA
Input Impedance: 12K ohms RCA
THD+N: 0.003%, 2.5Vrms in, 1KHz
Dynamic Range: 110dB, A-weighted 20Hz-20KHz

General:
Power Usage On: 8W
Power Usage Off: 0.0W
Power Requirement: 12VDC
Dimensions: 216 mm W x 318 mm D x 88 mm H
Weight: 6.5 kg

VBL1 PSU
Maximum Output: 12VDC at 0.8A
Output Voltage: 12VDC +/- 5%
Output Voltage Noise: <27 Microvolts RMS, un-weighted 0 Hz – 100 KHz
Power Usage On: 10W typical
Power Usage Off: 0.0W
Power Requirement: 12VDC
Dimensions: 216 mm W x 318 mm D x 88 mm H
Weight: 6.5 kg

bump

bump