TONE WINNER AD-8300 11 CHANNEL POWER AMP

TONE WINNER AD-8300
11 CHANNEL POWER AMP
CONDITION NEW WITH BOX
CONTACT NO :01123129315
LOCATION PENANG
PRICE RM8000

Fully modular audio power amplifier with a high-efficiency switch mode power supply (SMPS), independent, fully discrete, dual differential, high current, short signal path 150 Watts Class A/B amplifier modules, Optimized 300 Watts Class H amplifier modules, and microprocessor-controlled fault protection.

AUDIO SPECIFICATIONS
AD8300 features three of our 300 Watts High-Powered Single Channel Modules & Eight 150 Watts Amplifier Modules.

AUDIO SPECIFICATIONS (HIGH-POWERED SINGLE CHANNEL MODULES): LCR CHANNELS & SURROUND CHANNELS
LCR Channels 350 Watts & LS,RS,LBS,RBS 155 Watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven
LCR Channels 605 Watts & LS,RS,LBS,RBS 276 Watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven
LCR Channels 320 Watts & LS,RS,LBS,RBS 150 Watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; Two channel driven
LCR Channels 516 Watts & Surround Modules 207+ Watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 4 Ohms; Two channel driven
LCR Channels 240+ Watts & Surround Modules 105+ Watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; all channel driven
Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 10 Hz to 20 kHz (+ / – 0.1 dB)
Broadband Frequency Response: 1 Hz to 89 kHz +0/-2 dB.THD + noise: < 0.009%; at 100 watts RMS; 1 kHz; 8 Ohms
Signal to Noise Ratio (8 Ohm load):
> 111 dB; ref FTC rated power; unbalanced input (A-weighted).
> 86 dB; ref 1 watt; unbalanced input (A-weighted)
Minimum Recommended Load Impedance (per channel): 4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads)
Damping Factor (8 Ohm load): 141
Gain: 29.3 dB
Maximum Power Consumption: 2,540 watts