Cambridge Audio CP2 MM & MC phono preamp

Cambridge Audio CP2 MM & MC phono preamp

Cambridge Audio CP2 Moving Magnet & Moving Coil Phono Preamplifier that adds excitement and life to the sound of your vinyl records.

CP2 is designed using premium components chosen for exceptional accuracy, amplifying the signal without distorting it.

Works with all turntables, whichever type of cartridge they use. Even if your amplifier does have a built-in phono stage, it’s well worth bypassing it using the CP2 to deliver much greater depth and detail.
The Cambridge Audio CP2 delivers a robust, line-level signal infused with rich, dynamic sound, revealing layers of musical detail hidden in the grooves of your favorite vinyl recordings.

High-quality ‘Class A’ amplification circuits and hand-picked components housed in an all-metal outer casing featuring a thick brushed aluminum front panel.




Switchable subsonic filter to remove the unwanted and disruptive effects of excessive low-frequency energy caused by turntable rumble or record imperfections.

Cambridge knows that not every phono cartridge delivers perfectly even left- and right-channel output signals, they added a fine-tune balance control that lets you correct for any differences. If you’re a serious vinyl lover, you owe it to yourself to discover the Cambridge Audio difference.

Advanced amplification:
Audio circuitry has been refined with multiple transistors wired in parallel ensuring the lowest possible distortion and noise. A copper shield provides further protection to this extremely sensitive part of the circuitry, limiting the noise that can be injected into the signal. This is especially important with a Moving Coil cartridge because its signal is even quieter and more delicate than Moving Magnet, so it needs even more amplification.



*Phono pre-amplifier with moving magnet (MM) and moving coil (MC) input stages
*External power supply for reduced noise and interference
*Balance left right control for fine correction of cartridge imbalance
*Discrete transistors for the all-important input stages instead of the more common integrated circuits
*Acoustically damped full-metal chassis with thick, brushed aluminum front panel
*Eco-friendly <1W Standby power consumption
*Single-ended “Class A” gain stage with audiophile passive RIAA equalisation
*Multi-parallel capacitors to achieve exceptional RIAA accuracy of only 0.3dB up to 50kHz
*Selectable subsonic filter to eliminate very low frequency “rumble” caused by vinyl imperfections

Brushed black finish.

High-spec multi-parallel capacitors achieve exceptional RIAA accuracy – the industry standard for reproducing vinyl recordings. A highly accurate, subsonic filter also removes the common problem of unwanted low-frequencies that are inaudible but can damage subwoofers.



Specifications:
-Gain @ 1kHzMoving Magnet: 39dB | Moving Coil: 55dBB
-Nominal output: 300mV
Sensitivity for nominal output: 3.35mV
-THD (MM): 20Hz-20kHz<0.009%
-THD (MC): 20Hz-20kHz<0.002%
-RIAA curve accuracy Moving Magnet: <+/-0.3dB with subsonic fileter off
-Signal to noise ratio using Audio Precision RIAA-1 with grounded inputs- Moving Magnet: 86dB | Moving Coil: >72dB
-Input impedance- Moving Magnet: 47k Ohm | Moving Coil: 100 Ohm
-Input capacitance: 220pF
-Overload margin: >30dB
-Crosstalk @ 20kHz- Moving Magnet: >83dB | Moving Coil: >69dB

Dimensions: H46 x W215 x D133
Weight: 0.9kg

Audioappraisal.com – “Another remarkable effort from Cambridge Audio. The CP2 is an excellent phono stage for the money. It’s well made and aesthetically pleasing with a sound to match. It needs a fully adjustable MC section to truly better the competition, but even as it’s one of the best in its class. Highly recommended.”

Used, great working condition.
Comes with power adapter. (No Box)

RM 690


@ Subang Jaya ss14
**Credit cards accepted.
Contact 01 2-6116917
https://actsessory.com/pre-owned-used/
www.facebook.com/Actsessory